BLACK WOOD CHAIR Instruction Manual

▼Watch the assembly video▼

▼View assembly instructions with images▼

STEP 1. Check the contents

Main unit x1, Leg extension parts x2, Storage bag x1

STEP 2. Attaching the leg extension parts

Unfold the main unit and arrange it for easy installation.

Hook the metal fitting onto the fastener on one leg, then insert the part into the joint.

Repeat the same process on the opposite side by inserting the parts into the leg joints and securing them with the fasteners.

In some cases, the fastener and the metal fitting may not reach each other.
*There are individual differences, but this is not a defect, as the fabric is taut and firmly constructed.

If the fitting does not reach, stand the main unit up so that the legs are horizontal, then press down on the leg caps with your palm to attach them.

Attach the leg extension part to the other side in the same way.

STEP 3. Attach the curve parts

Stand the unit upright with the legs at the bottom, and screw in the curved part.

In some cases, the width may be narrow, making it difficult to fit smoothly.
*There may be individual differences, but this is not a defect, as the fabric is taut and firmly constructed.

You can snap it into place by pulling outward while applying pressure.

Attach the curved part to the opposite side in the same way.

Spread the legs to set it up, and you're done.

▼Notes▼

・Please note that as this product is made of natural wood, there may be individual variations, uneven paint, or minor scratches.

・Ensure that all parts are securely attached. Improper installation may result in injury.

・Due to its sturdy construction, some force may be required during assembly.

・Please take great care to avoid injury while assembling.

・Excessive disassembly is not recommended. Please be aware that we cannot be held responsible for any damage, loss of parts, injury, or any other issues resulting from disassembly.